EverFocus Security Camera EPTZ1000 User Manual

Speed Dome  
EPTZ1000  
USER MANUAL  
Date: Mar 2009  
 
2.5.3. Corner mount .................................................................................2-22  
2.5.4. Multi-Function Keyboard Controller ...........................................2-22  
3.  
EPTZ1000CAMERA SETUP MENU...............................3-23  
3.1. Structure of the Setup Menu.........................................................................3-23  
3.1.1. Camera Setup Menu.......................................................................3-24  
4.  
EPTZ1000FUNCTION SETUP AND OPERATION.........4-30  
4.1. Manual Control Mode....................................................................................4-30  
4.2. Auto Pan Mode ..............................................................................................4-30  
4.3. Position Setting.............................................................................................4-31  
4.4. Tour Mode ......................................................................................................4-32  
4.5. Alarm Link to a Position/Tour.......................................................................4-33  
4.6. Other operations ...........................................................................................4-34  
1-2  
 
1. EPTZ1000OVERVIEW  
1.1. Introduction  
EPTZ1000, an intelligent high-speed dome camera is ready to secure your property  
with its omni-directional and exact monitoring. An 18X optical and 12X digital zoom  
combining with a high-performance chip makes captured images clear and vivid. The  
other powerful camera functions this type of speed dome equips with:  
¾
¾
¾
¾
PAL / NTSC image format suppose.  
Auto and fast focus increases the searching speed and precision.  
Auto Iris adjusts the monitoring image to the best brightness.  
White Balance function makes the shades of color more natural in different  
light conditions.  
¾
¾
BLC (Backlight Compensation) function makes objects clear in a high  
illumination background.  
Color / B&W images auto switching to enhance the sensitivity in a low light  
condition or at night.  
Furthermore, the micro control unit enables camera a nimble and exact movement  
from minimal 0.01°/sec to maximal 360°/sec. It can go to every preset position in 1  
second. It also has other advantages such as:  
¾
¾
¾
192 preset positions are available.  
16 cruise tours can be set, and each tour contains up to 16 positions.  
Up to256 speed domes can be supported on a RS485 bus when all speed  
domes are controlled by multi-function keyboard controller.  
Auto heater and fan to fit all kinds of temperature.  
¾
¾
Provide 4 alarm inputs and 1 alarm output.  
1-3  
 
All of the features make the intelligent high-speed dome camera works for a wide  
range and demanding application such as banks, airports, stations, casinos, streets  
of cities, intelligent buildings, and etc.  
1-4  
 
1.2. Specifications  
Pickup Device  
Video Format  
Scanning System  
1/4'' SONY Type EXview HAD CCD  
NTSC or PAL  
NTSC: 525 TV lines, 60 fields/sec  
PAL: 625 TV lines, 50 fields/sec  
Picture Elements  
Horizontal Resolution  
Sensitivity  
768 x 494 ( NTSC ) , 752 x 582 ( PAL )  
480 TVL  
0.7 Lux/F=1.4  
S/N Ratio (AGC OFF)  
Electronic Shutter  
Digital Slow Shutter  
Shutter Selection  
Lens Type  
Over 50dB  
1~1/10,000 (s)  
Yes  
Yes  
18x optical zoom , f=4.1 mm (wide) to 73.8mm (tele) , F1.4 to  
F3.0  
216x max (18x Optical and 12x Digital Zoom )  
Yes  
Zoom Ratio  
Day/Night  
Black Light Comp.  
Auto Gain Control  
White Balance  
Video Output  
Sync. Mode  
ON/OFF  
Auto  
Auto/Indoor/Outdoor  
BNC 1.0Vp-p , 75ohm  
Line Lock/Internal Sync  
24VAC  
Power Source  
Power Consumption  
Operating Temperature  
Focus Control  
Horizontal Rotation  
Speed  
18W; 70W with heater  
-40°C~50°C ; -40°F~122°F  
One push/Auto/Manual  
0.1°/s~360°/s (1-239 grade shift gears)  
Horizontal Rotation  
Range  
360° unlimited rotation  
Tilt Rotation Range  
Auto Flip  
90° pendulum motion  
Rotates 180° when camera tilts to the vertical position  
Control speed auto-adjusted according to zoom length changing  
Auto Zoom Speed  
Control  
Auto Pan, 2 Points  
Scanning  
Can set freely  
Auto Pan Speed  
Dwell Time (2 points)  
1~239 grades available  
1~239 second available  
1-5  
 
Preset Positions  
Running to Position  
Speed  
192 positions  
1239 grade available,0.1º/s - 360º/s  
Dwell Time at Preset  
Position  
1~239 second available  
Tour  
16 groups  
Tour Point per Group  
Fan & Heater  
16 preset positions  
Fan & Heater auto starts  
Position Accuracy  
Alarm  
±0.1°  
4 in 1 out with tour/position auto triggering  
Yes  
Built-in Menu for  
Functions  
Communication  
Communication Speed  
Built-in Protocols  
Address Editable  
Speed Dome Address  
Manual Pan/tilt speed  
Weatherproof Ratings  
Dimensions  
RS-485  
1200/2400/4800/9600 bps  
Auto, EVF, Plus-D, A-Type, Pelco-D, Pelco-P  
Yes (through DIP switch)  
0-255  
Pan: 0.1º ~ 180º/s  
Tilt: 0.1º ~ 180º/s  
IP66  
218.5mm (W) x 267.5mm (H) /  
8.6" (W) x 10.5" (H)  
4.2kg/9.25lbs  
Weight  
Certifications  
CE ; FCC  
1-6  
 
1.3. Feature  
1.3.1. Hardware Overview  
EPTZ1000  
Wall Mount Bracket  
M5 Bolt (Hex) x3  
Base PCB board  
Control board  
Housing  
Connection Bus  
Power Cable  
BNC Cable  
Inner Housing  
M3 Bolt x3  
RS485 Cable  
Mechanical Part  
Camera Module  
Bulb  
1-7  
 
1.3.2. Base Board  
The base board that is on the bottom of the housing connects to power cable, video cable,  
control cable, alarm cable, fan and heater (fan and heater are for EPTZ1000 only). In  
order to connect to cables, the board needs to be taken off, and put back after finishing  
connecting to all cables. The connectors of cable names are marked on the board in white  
text. The details of the alarm connector (JP5) are shown on the APPENDIX A.  
For EPTZ1000, JP1, JP3 and JP6 that are two-pin connectors on the base board need to  
be taken off during installation. JP1 and JP3 are connectors for heater, and they can be  
switched. JP6 is a fan controller connector that turns on/off of the fan. The 3 cables are too  
short to be connected to a wrong connector when putting them back.  
RELAY  
JP5  
Video +  
Video -  
RS485 +  
RS485 -  
AC24  
AC24  
JP4  
JP6  
JP3  
JP1  
EPTZ1000 Baseboard  
1.3.3. EPTZ1000Control Board  
The PCB board with two dipswitches is the control board of speed dome. The two  
switches are used to set address, protocol, Baud Rate, video format and terminator  
resistance.  
1-8  
 
CPU  
SW2  
ID1  
ID2  
ID3  
ID4  
ID5  
ID6  
ID7  
ID8  
SW1  
1.4. EPTZ1000Connection  
110V AC  
24V AC  
POWER  
24V AC / 3.5 A  
Adapter  
BNC  
1.0Vpp ± 0.2V, 75  
Video Out  
Ω
RS485 Tx(+)  
RS485 Tx(-)  
RS485 Control Line  
EPTZ1000DN/  
EPTZ500DN  
Alarm 1  
Alarm 2  
Alarm 3  
Alarm 4  
4 ALARM INPUTS  
GROUND  
ALARM OUTPUTS  
N.C.  
N.O.  
COM  
1-9  
 
1.5. EPTZ1000 Quick Operation Guide  
EPTZ1000and EKB500 (Keyboard) can work together by using factory default  
setting. You just need to connect cables by following the steps:  
1. Connect the RS485 cable to EPTZ1000and a Keyboard (EKB500).  
2. Connect a video cable from EPTZ1000to a monitor.  
3. Connect the power to the EPTZ1000and a Keyboard (EKB500) .  
After the speed dome finishes the self-test mode, you can start to operate the speed  
dome via the keyboard.  
To operate the EPTZ1000:  
UP  
IRIS  
+
Focus  
F.  
Zoom  
In  
Zoom OUT  
Zoom IN  
LEFT  
RIGHT  
-
N.  
Out  
DOWN  
1. Shift the Joystick up/down or right/left to view from camera.  
2. Turn the top of the Joystick to zoom in/out.  
3. Press Zoom In/Out, Focus F. /N. and IRIS +/- function keys to operate the  
EPTZ1000.  
1-10  
 
2. EPTZ1000INSTALLATION  
2.1. Packing List  
There are 3 boxes that are housing, bulb and mechanical part with a camera module, one  
wall mount bracket, one power adapter and one accessory packet in the package. The  
detail accessories list below:  
¾
¾
¾
¾
¾
¾
Housing x1  
Bulb x1  
Mechanical part with a camera module x1  
Wall mount bracket x1  
Adapter x1  
Accessory packet  
Glove x2  
M5 Hex Allen wrench x1  
Pin connector x1  
M5 screw (Hex) x3 for wall mount bracket fixing  
M3 screw x3 for bulb fixing  
Anchor nut and wall mount screw x4  
2.2. Cable Needed  
- Power Cable  
An adapter with 24V AC/3.5A output provides the power to the speed dome. An  
extension power line may be needed.  
Note: The input AC voltage range of an adapter depends on different area.  
Please make sure the voltage range before installing.  
2-11  
 
- Video Cable  
A BNC cable is used for connecting a speed dome to a DVR or a monitor. An amplifier  
may be needed if the video cable is too long.  
- Control Cable  
Basically, EPTZ1000uses a differential pair to connect to other devices by cascading.  
A cable that has low signal decline can be used as a control cable.  
- Alarm Cable  
An alarm cable is not included in the packing list. A suitable wire can be used as an  
alarm cable.  
2.3. Initial Setup  
Initial setup includes dome address, communication protocol, transmission speed, video  
format, and terminator resistance settings. All of the settings should be confirmed before  
the dome is installed. The control-related setting that is address, communication protocol  
and transmission speed have to be set consistently with the control device such as a  
keyboard or a DVR.  
Notice: Please make sure the power is off before setting, and restart the speed dome to  
enable a new value after changing.  
2-12  
 
2.3.1. Address Setting  
The address code of the EPTZ1000should be set to correspond properly with a control  
device to control multiple dome cameras. The address codes are made up by the  
dipswitch SW1 (8 bits) on the PCB board. The 8 bits dipswitch indicates the binary  
coded of the address, and there are 256 addresses can be selected (0 ~ 255, 28 = 256).  
It also means that there up to 256 dome cameras can cascade on the RS485 bus. The  
dipswitch setting and the indicated address are represented in the following chart.  
Note: The factory default address is 1.  
Notice: Please make sure the power is off before setting, and restart the speed dome  
to enable a new value after changing.  
CPU  
SW2  
ID1  
ID2  
ID3  
ID4  
ID5  
ID6  
ID7  
ID8  
SW1  
2-13  
 
Switch  
Address  
Switch  
Address  
                                                                                                                      
Sw  
                                                                                                                        
                                                                                                                        
                                                                                                                           
i
                                                                                                                            
tch  
                                                                                                                             
                                                                                                                             
                                                                                                                               
                                                                                                                               
                                                                                                                                        
Address  
                                                                                                                                          
                                                                                                                                           
                                                                                                                                             
                                                                                                                                             
                                                                                                                                               
                                                                                                                                               
                                                                                                                                                
                                                                                                                                                
                                                                                                                                                  
                                                                                                                                                    
                                                                                                                                                                  
Sw  
                                                                                                                                                                     
                                                                                                                                                                     
                                                                                                                                                                       
i
                                                                                                                                                                        
t
                                                                                                                                                                          
ch  
                                                                                                                                                                            
                                                                                                                                                                            
                                                                                                                                                                                    
Addre  
                                                                                                                                                                                       
                                                                                                                                                                                       
                                                                                                                                                                                         
                                                                                                                                                                                         
                                                                                                                                                                                           
                                                                                                                                                                                           
                                                                                                                                                                                             
                                                                                                                                                                                             
                                                                                                                                                                                               
ss  
                                                                                                                                                                                                 
                                                                                                                                                                                                 
ON  
ON  
ON  
ON  
0
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON  
ON  
ON  
ON  
1
1
1
1
1
ON  
ON  
ON  
ON  
2
1
1
1
1
ON  
ON  
ON  
ON  
3
1
1
1
1
ON  
ON  
ON  
ON  
4
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
1
1
1
1
ON  
ON  
ON  
ON  
5
1
1
1
1
ON  
ON  
ON  
ON  
6
1
1
1
1
ON  
ON  
ON  
ON  
7
1
1
1
1
ON  
ON  
ON  
ON  
8
1
1
1
1
ON  
ON  
ON  
ON  
9
1
1
1
1
ON  
ON  
ON  
ON  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
2-14  
 
Switch  
Address  
128  
129  
130  
131  
132  
133  
134  
135  
136  
137  
138  
139  
140  
141  
142  
143  
144  
145  
146  
147  
148  
149  
150  
151  
152  
153  
154  
155  
156  
157  
158  
159  
Switch  
Address  
160  
161  
162  
163  
164  
165  
166  
167  
168  
169  
170  
171  
172  
173  
174  
175  
176  
177  
178  
179  
180  
181  
182  
183  
184  
185  
186  
187  
188  
189  
190  
191  
                                                                                                                      
Switch  
                                                                                                                         
                                                                                                                           
                                                                                                                            
                                                                                                                              
                                                                                                                              
                                                                                                                                
                                                                                                                                
                                                                                                                                         
Address  
192  
193  
194  
195  
196  
197  
198  
199  
200  
201  
202  
203  
204  
205  
206  
207  
208  
209  
210  
211  
212  
213  
214  
215  
216  
217  
218  
219  
220  
221  
222  
223  
                                                                                                                                         
                                                                                                                                           
                                                                                                                                             
                                                                                                                                             
                                                                                                                                                
                                                                                                                                                 
                                                                                                                                                   
                                                                                                                                                     
                                                                                                                                                                   
Switch  
                                                                                                                                                                     
                                                                                                                                                                     
                                                                                                                                                                        
                                                                                                                                                                        
                                                                                                                                                                         
                                                                                                                                                                         
                                                                                                                                                                          
                                                                                                                                                                           
                                                                                                                                                                            
                                                                                                                                                                             
                                                                                                                                                                                     
                                                                                                                                                                                     
Address  
224  
225  
226  
227  
228  
229  
230  
231  
232  
233  
234  
235  
236  
237  
238  
239  
240  
241  
242  
243  
244  
245  
246  
247  
248  
249  
250  
251  
252  
253  
254  
255  
                                                                                                                                                                                        
                                                                                                                                                                                          
                                                                                                                                                                                            
                                                                                                                                                                                              
                                                                                                                                                                                                
                                                                                                                                                                                                  
                                                                                                                                                                                                  
ON  
ON  
ON  
ON  
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
ON  
ON  
ON  
ON  
1
1
1
1
2-15  
 
2.3.2. Communication Protocol Setting  
The 1st, 2nd and 3rd bits of the SW2 are used to set communication protocol. The factory  
default protocol is EVF.  
EVF - 1  
PELCO-D  
PELCO-P  
TYPE-A  
SW2  
Protocol  
Baud Rate  
PAL / NTSC  
Maching Resistance  
Notice: Please make sure the power is off before setting, and restart the speed dome to  
enable a new value after changing.  
Set all of protocol switches to ON; the EPTZ1000will enter a self-test mode.  
2.3.3. Transmission Speed Setting (Baud Rate Setting)  
The 4th and 5th bits of the SW2 on the PCB board are used to set the Baud Rate. The  
default baud rate setting is 9600.  
9600 BPS 4800 BPS 2400 BPS 1200 BPS  
SW2  
Protocol  
Baud Rate  
PAL / NTSC  
Maching Resistance  
Notice: Please make sure the power is off before setting, and restart the speed dome to  
enable a new value after changing.  
2-16  
 
2.3.4. Video Format Setting  
The 6th bits of the SW2 on the PCB board are used to set the video format. The default  
video format depends on the factory setting. Please do not change it.  
NTSC  
PAL  
SW2  
Protocol  
Baud Rate  
PAL / NTSC  
Maching Resistance  
Notice: Please make sure the power is off before setting, and restart the speed dome to  
enable a new value after changing.  
2-17  
 
2.4. Rack and Speed Dome Installation  
2.4.1. Installation Requirements  
1. Installation should be handled by a qualified service agent and should comply with  
all local regulations. Service personnel should expect potential problems such as  
surface strength, surface material, falling objects, outer breaches, building vibration  
or other similar conditions.  
2. Check for all necessary materials, and ensure if the selected installation location is  
suitable for the speed dome.  
2.4.2. EPTZ1000 Dome Camera Wall Mount Installation  
Notice: Installation location that is a wall, a pole or a ceiling needs to support above five  
times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and  
dropping.  
1. Set wall mount bracket on the wall. Mark the center of the holes on the wall against  
the bracket holes. Use a drill to make 4 holes that can be nailed 4 0.25” X 1.25”  
screws at the marks.  
Notice: The length of the screws depends on the surface material. The mentioned screws  
are used in the normal concrete surface.  
2-18  
 
2. Thread the cable through the hole in the wall mount bracket, and screw in 4 M8  
nuts for mounting the bracket.  
3. Take off the housing from the packing, and take off the baseboard (4 bolts on it.)  
inside the housing. Thread the cable through the top of the housing. Fix the  
housing on the wall mount bracket, and screw in 3 M5 bolts (Hex) on the top of the  
bracket with the attached Hex Allen wrench to fix the housing.  
M5 Bolt  
Hex Allen wrench  
RELAY  
JP5  
Video +  
Video -  
RS485 +  
RS485 -  
AC24  
AC24  
JP4  
JP6  
JP3  
JP1  
4. Connect the cable connectors to the nodes on the baseboard, and then fix the  
baseboard in the housing by screwing 4 bolts on it.  
Notice: Please notice the polarity of control line. The EPTZ1000 will not work if the  
polarity of control line is mis-connected.  
2-19  
 
5. Align the two screw holes on the bottom of mechanical part to the two bolts on the  
base of the housing, and twist the mechanical part clockwise a little bit in order to  
engage it with the base. Screw the two bolts on the base, and then connect and fix  
the connection bus to the PCB board on the mechanical part.  
Notice: The camera module on the mechanical part is very sensitive. Please be careful  
when installing this part.  
6. Remove the lens protection cover before installing the bulb. Align the 3 bolt holes  
into the 3 housing bolt holes, and screw thee M3 bolts with the attached small  
screw driver to fix the bulb.  
M3 Blot  
M3 Blot  
GLOVE  
2-20  
 
Notice: In order to protect the bulb from dirt and scrape, please put on the gloves before  
installing the bulb.  
7. Turn on the power, and start to operate the EPTZ1000.  
Note: When turning on the power, the EPTZ1000 will enter self-inspection mode, and carry  
out a self-testing program. After finishing self-inspection, you can start to operate  
the EPTZ1000.  
2-21  
 
2.5. Separately Sold Accessories  
2.5.1. Pole mount  
The pole mount is used for installing a speed dome on the ceiling  
indoors or outdoors.  
The extension poles are available for the pole mount.  
2.5.2. Pole adapter  
The pole adapter is used for installing a wall mount bracket to a  
pole indoors or outdoors.  
2.5.3. Corner mount  
The corner mounts are used for installing a wall mount bracket to a  
270° corner of walls indoors or outdoors.  
2.5.4. Multi-Function Keyboard Controller  
Multi-Function System Controller  
Capable of controlling PTZ, DVR and Monitor  
3D Joystick control of PTZ function  
2-22  
 
3. EPTZ1000CAMERA SETUP MENU  
In this section, setup and operation guide of EPTZ1000will be introduced. There are  
25 items of the setting menu. However, there is only one line on the line display, so  
using some combination keys to operate is necessary.  
3.1. Structure of the Setup Menu  
Press MENU to enter camera setup menu.  
Press Shift + Joystick up/down to change subentries, and right/left to change the setting.  
Items  
Option  
CAM ID  
-----------------  
DZOOM  
FOCUS  
IRIS  
OFF / ON  
AUTO / MAN / ONE PUSH  
AUTO / MAN  
NEGATIVE  
OFF / ON  
OFF / AUTO  
S.SHUTTER  
COLOR  
OFF / ON  
OFF / ON  
DISPLAY  
BACKLIGHT  
WBC MODE  
TITLE DISPLAY  
AUTO FLIP  
ALM-IN1 SET  
ALM-IN2 SET  
ALM-IN3 SET  
ALM-IN4 SET  
ALM-IN PRIO  
ALM-OUT  
OFF / ON  
AUTO / INDOOR / OUTDOOR  
OFF / ON  
OFF / ON  
NIGHT N.O./ NIGHT N.C./ N.O. / N.C. / OFF  
N.O. / N.C. / OFF  
N.O. / N.C. / OFF  
N.O. / N.C. / OFF  
1234 / 2341 / 3421 / 4123  
OFF/ LATCH / 3 /5 /10 /20 /30 /60 SEC  
OFF/ LIMIT ENT  
MOTION  
ENT  
TOUR  
X CNT  
0000000000  
0000000000  
Y CNT  
0000000000  
PO CNT  
LOAD DEFAULT  
EXIT MENU  
-----------------  
-----------------  
3-23  
 
3.1.1. Camera Setup Menu  
Press MENU to enter camera setup menu.  
Press Shift + Joystick up/down to change subentries, and right/left to change the setting.  
1. CAM IDThe name assigned to the camera.  
2. DZOOMDigital zoom enable or disable.  
ON: Enable a digital zoom.  
OFF: Disable a digital zoom.  
3. FOCUSFocus type, auto focus and manual focus are available.  
AUTO: Auto focus is enabled.  
MAN: Manual focus is enabled.  
ONE PUSH: Enable the one push trigger focus mode. The focus lens holds the same  
position until the next trigger command is received. This function prevents  
the wrong focus in dark. This option is the default value.  
4. IRISIRIS type, auto iris and manual IRIS are available.  
AUTO: Auto IRIS is enabled.  
MAN: Manual IRIS is enabled.  
5. NEGATIVENegative image.  
ON: Enable a negative image.  
OFF: Disable a negative image.  
3-24  
 
6. S.SHUTTER : (this function is only available for EPTZ1000)  
OFF: Disable auto slow shutter.  
AUTO: Auto Slow electrical shutter. In order to enhance the view in the low lux  
environment, slow shutter allows more light go through the shutter.  
7. COLORColor display.  
ON: Enable a color display.  
OFF: Disable a color display, and show a B&W display.  
8. DISPLAYDisplay system information and status.  
ON: To display the system information and status on the screen.  
OFF: Not to display the system information and status on the screen.  
9. BACKLIGHTBacklight compensation.  
ON: Enable backlight compensation.  
OFF: Disable backlight compensation.  
10. WBC MODEWhite balance mode.  
AUTO: Auto white balance mode.  
INDOOR: Indoor white balance mode.  
OUTDOOR: Outdoor white balance mode.  
11. TITLE DISPLAY : Display the title.  
ON: Enable title display.  
OFF: Disable title display.  
3-25  
 
12. AUTO FLIPFlip the camera when it tilts to the 90° end.  
ON: Enable auto flip.  
OFF: Disable auto flip.  
13. ALM-IN1The status of input alarm 1.  
NIGHT N.O.: Dome turns to “Night mode” if external contact open. Dome turns to “Day  
mode” if external contact closed.  
NIGHT N.C.: Dome turns to “Night mode” if external contact closed. Dome turns to “Day  
mode” if external contact open.  
N.O.: Enable a normal open alarm input.  
N.C.: Enable a normal close alarm input.  
OFF: Disable alarm input.  
14. ALM-IN2The status of input alarm 2.  
N.O.: Enable a normal open alarm input.  
N.C.: Enable a normal close alarm input.  
OFF: Disable alarm input.  
15. ALM-IN3The status of input alarm 3.  
N.O.: Enable a normal open alarm input.  
N.C.: Enable a normal close alarm input.  
OFF: Disable alarm input.  
16. ALM-IN4The status of input alarm 4.  
N.O.: Enable a normal open alarm input.  
N.C.: Enable a normal close alarm input.  
3-26  
 
OFF: Disable alarm input.  
17. ALM-IN PRIOThe priority of alarms.  
1234: The alarm priority is 1>2>3>4.  
2341: The alarm priority is 2>3>4>1.  
3412: The alarm priority is 3>4>1>2.  
4123: The alarm priority is 4>1>2>3.  
18. ALM-OUTDuration time of the alarm output.  
OFF: Disable alarm output.  
3 / 5 / 10 / 20 / 30 / 60 SEC: The duration of the alarm output sustains in seconds.  
LATCH: The alarm output will not stop until there is any operation on keyboard.  
19. MOTION: This is used to set a limitation for Auto Pan function. When Motion is ON,  
you can use Auto Pan function simply by pressing “Shift“+ “A.Pan “of the keyboard  
(according to A. Pan position you have set).  
OFF: Motion limitation function is disabled.  
LIMIT: Press “Enter” first.  
The message NOW LIMIT OFF shows up, press “Enter” again.  
The message CHANGE ON shows up, press “Enter” to change.  
To change the value back to OFF, simply follow the same steps again.  
If you need to reset, press “IRIS –“ of the keyboard to exit.  
20. TOURTour setting or tour run option. Press “Enter” first to enter tour mode.  
Shift joystick to right and left (< >), shift SET or RUN option. (Shift the joystick up for  
returning to previous setting). Press “Enter” to confirm.  
3-27  
 
For Tour setting: Shift joystick to right and left (< >) for changing Set Numeral  
(T01A~T16A), then press “Enter” to confirm.  
Shift joystick to right and left for selecting PRE Numeral (position) from 01~99, then press  
“Enter” to confirm.  
Shift joystick up and down to adjust DWL (dwell) time from 0~99 sec, then press “Enter” to  
confirm.  
Shift joystick to right and left for adjusting speed (5~235, with an interval of 5), then press  
“Enter” to confirm.  
For Tour Run:  
Shift joystick to right and left for selecting RUN NUM (T01A~T16A) of the tour that you  
previously set. Press “Enter” to start running the tour.  
Alternatively, you could run the tour without entering MENU. Press “Position + 97” to run  
the tour that you have previously set, please be informed that this function is only valid for  
T01A.  
If you need to reset, press “IRIS –“ of the keyboard to exit.  
21. X CNTX-axis counter. This counter counts the x axis movement, and 1 is counted  
when the speed dome pans 360°.  
22. Y CNTY-axis counter. This counter counts the y axis movement, and 1 is counted  
when the speed dome tilts 180°.  
23. PO CNTPosition counter. This counter counts the go-position times, 1 is counted  
when speed dome goes to a position once.  
24. LOAD DEFAULTLoad default setting.  
3-28  
 
Select this item, and then press “Enter” to load default setting.  
Press “Clr” + “Menu” whenever you want to quit menu setting.  
25. EXIT : To exit.  
Select this item, and then press “Enter” to quit setting.  
Press “Clr” + “Menu” whenever you want to quit menu setting.  
3-29  
 
4. EPTZ1000FUNCTION SETUP AND OPERATION  
4.1. Manual Control Mode  
¾
Manual control: Shift Joystick Up/Down/Left/Right, and turn it  
Clockwise/Counterclockwise to control speed dome.  
Use the control keys which are Zoom, Focus and IRIS function keys on the  
keyboard to zoom In/Out, focus N (near)/F (Far), or IRIS +/-.  
Note: Zoom In/Out control keys will be disabled when entering to OSD menu  
mode.  
¾
HOME Mode: The camera view will go back to the home position when there is no  
keyboard operation in a specific time. The home position and the specific time can  
be set by press Set + Home.  
If you set the time to 0 minute, then the camera will go back to home if there is no  
keyboard operation in 5 seconds. This is the minimum no action time for HOME  
mode.  
Note: If "HOME" function is enabled, dome will go to home immediately after  
powering on.  
4.2. Auto Pan Mode  
¾ Two point auto pan: Press A.Pan to enter the auto pan mode, and then the  
system will ask you to enter the auto pan speed (1~239). Press Enter to start auto  
pan.  
In order to set the two points, press Set + A.Pan, and then enter the dwell time  
(1~239 seconds) of each point. EPTZ3000 begins to pan from point A to point B  
clockwise.  
¾
360° auto pan: Press Shift + A.Pan to enter the 360° auto pan. System will ask you  
4-30  
 
to enter 360° auto pan speed (1~239). The camera will turn 360° automatically, but  
not tilt.  
4.3. Position Setting  
¾
Focus on a preset position: Press the number key, and then press Position to  
focus on the number of preset position; or you can press Position, then enter the  
preset position number, and then press Enter to focus on the number of preset  
position.  
¾
Preset a position: Shift the Joystick to the position you would like to preset, and  
then press Shift + Position. The system will ask you to enter the preset position  
number (1~192), and then press Enter to save the position. There are up to 192  
positions can be preset.  
Three specific preset positions can be set as follows:  
92 => Set Left Limit Stop (A position)  
93 => Set Right Limit Stop (B position)  
95 => Enter Menu mode (Use keyboard control keys to control OSD items; Focus F.  
to go downward, Focus N. to go upward. IRIS + go to previous setting and IRIS –  
to exit).  
You can directly go to the following specific preset positions:  
33 => Rotation of 180 degree  
34 => Go to Home position (if Home Position is set by EVF Keyboard)  
96 => Stop Scan  
97 => Start running tour  
98 => Frame scan (60 degree / step)  
Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting  
speed.  
4-31  
 
Dwell time: default is 2 sec; It can be changed by EVF Keyboard Set + A.Pan  
setting dwell time of A pos or B pos.  
99 => Auto scan (360 degree)  
Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting  
speed).  
For EPTZ1000, We can even set camera’s ICR Day/Night function with RS-485  
command via keyboard. How to do this? Press Position + 88 to link to Day mode or  
Position + 89 to link to Night mode, “ICR AUTO” message will be shown on the  
right-bottom part of the screen. If OSD Day/Night ICR mode is “AUTO”, it cannot be  
controlled by preset position setting.  
¾
Set the parameter of a preset position: Press Set + Position to set the parameter  
of a preset position. You can set the going-to speed (1~239), dwell time (1~239  
seconds), and the title of the position. Shift the joystick Right/Left to change bits,  
and shift the Joystick Up/Down to change the alphanumeric characteristic. The  
available alphanumeric characteristics are 0~9, A~Z, &, ?, !, :, ‘, ., ,, /, -, and a  
space.  
¾
Delete a preset position: Press Clr + Position to delete a preset position. The  
system will ask you to enter the position number that you would like to delete, and  
then press Enter.  
4.4. Tour Mode  
In the tour mode, you can set a tour for viewing. There are 16 tours can be set, and 16  
preset positions in a tour.  
4-32  
 
¾
One-way tour Mode: Press Tour to enter the tour mode. The system will ask you  
to enter the tour number you would like to run, and starts the tour after pressing  
Enter. To preset a tour before running it is necessary.  
Preset a one-way tour: Press Set + Tour to preset a one-way tour. The system will  
ask you to enter preset position numbers (The positions need to be preset). After  
finish entering all positions, press Stop to quit, and then press Enter to save the  
tour.  
¾
To-and-fro tour mode: Press Shift + Tour to run a to-and-fro tour. The system will  
ask you to enter the tour number you would like to run, and starts the tour after  
pressing Enter. To preset a tour before running it is necessary.  
Note 1: The difference between the One-way tour mode and To-and-fro tour mode is their  
return modes. For example: There is a tour with 3 preset positions 1, 2 and 3. The camera  
runs 123123 in the One-way tour mode, and 12321 in the To-and-fro  
tour mode.  
Note 2: You could set a pattern tour. Press Set + Tour, and input 0, press Enter. Sway the  
joystick to record the entire tour. Press Stop to stop recording tour. To view this pattern  
tour, simply press Tour, and input tour number 0.  
4.5. Alarm Link to a Position/Tour  
The EPTZ1000has 4 alarm inputs that can be set to link to a position or a tour when an  
alarm is triggered.  
¾
Set an alarm link:  
Press F1 to set an alarm link. Enter the alarm number, and then press Enter.  
Switch the Joystick up/down to select a position or a tour, enter a position or tour  
number, and then press Enter to confirm the alarm link setting.  
4-33  
 
If you set the position number to 99, the dome will do a 360 degree auto scan or AB  
two point pan if limit is ON. If you set the position number to 98, the dome will do a  
frame scan.  
¾
Delete an alarm link:  
Press Clr + F1 to delete a link of alarm to position/tour.  
Note 1: After alarm output signal is terminated, the speed dome will resume action  
or return to its original position.  
Note 2: After powering on the speed dome, it will detect alarm status automatically.  
4.6. Other operations  
The EPTZ1000can work with a DVR that has PTZ control functions, and a  
matching protocol. The available control functions depend on different DVRs.  
The EPTZ1000can work with a keyboard that has PTZ control functions, and a  
matching protocol. The available control functions depend on different keyboards.  
4-34  
 
APPENDIX A: The Alarm I/O Connection  
There are 4 alarm inputs and 1 alarm output available. The alarm I/O connector that is  
marked as JP5 is a nine-pin connector. It is located on the PCB board of the housing.  
JP5  
1 ~ 9  
JP5  
RELAY  
RELAY  
JP5  
Video +  
Video -  
RS485 +  
RS485 -  
AC24  
JP5  
AC24  
JP4  
JP6  
JP3  
JP1  
1 ~ 9  
EPTZ1000 base board  
Pin #  
Function  
Alarm Input 4  
Ground  
1
2
3
4
5
6
7
8
9
Alarm Input 3  
Alarm Input 2  
Ground  
Alarm Input 1  
Normal Open (N.O.)  
Common (COM)  
Normal Close (N.C.)  
4-35  
 
EverFocus Electronics Corp.  
Europe Office:  
Head Office:  
Albert-Einstein-Strasse 1  
D-46446 Emmerich, Germany  
TEL: 49-2822-9394-0  
12F, No.79 Sec. 1 Shin-Tai Wu Road,  
Hsi-Chih, Taipei, Taiwan  
TEL: +886-2-26982334  
FAX: +886-2-26982380  
China Beijing Office:  
Room B-05D-1, KESHI PLAZA , Shangdi Information  
USA L.A. Office:  
Industry Base,  
1801 Highland Ave. Unit A  
Duarte, CA 91010, U.S.A.  
TEL: +1-626-844-8888  
FAX: +1-626-844-8838  
Haidian District, Beijing China  
100085  
TEL: +86-10-62973336/37/38/39  
FAX: +86-10-62971423  
USA N.Y. Office:  
Japan Office:  
415 Oser Avenue Unit S  
Hauppauge, NY 11788  
Tel: 631-436-5070  
1809 WBG MARIBU East 18F,  
2-6 Nakase.Mihama-ku.  
Chiba city 261-7118, Japan  
TEL : +81-43-212-8188  
FAX : +81-43-297-0081  
Fax: 631-436-5027  
Your EverFocus product is designed and  
manufactured with high quality materials and  
components which can be recycled and reused.  
This symbol means that electrical and electronic  
equipment, at their end-of-life, should be  
disposed of separately from your household  
waste.  
Please, dispose of this equipment at your local  
community waste collection/recycling centre.  
In the European Union there are separate  
collection systems for used electrical and  
electronic product.  
Please, help us to conserve the environment we  
live in!  
Ihr EverFocus Produkt wurde entwickelt und  
hergestellt mit qualitativ hochwertigen Materialien  
und Komponenten, die recycelt und wieder  
verwendet werden können.  
Dieses Symbol bedeutet, dass elektrische und  
elektronische Geräte am Ende ihrer Nutzungsdauer  
vom Hausmüll getrennt entsorgt werden sollen.  
Bitte entsorgen Sie dieses Gerät bei Ihrer örtlichen  
kommunalen Sammelstelle oder im Recycling  
Centre.  
Helfen Sie uns bitte, die Umwelt zu erhalten, in der  
wir leben!  
P/N: MW01G0040B Ver. C  
4-36  
 

CODi Carrying Case Carrying Cases User Manual
Craftsman Impact Driver 87519119 User Manual
Creative All in One Printer AL 1043 User Manual
CTX Oven G 26 User Manual
Delta Electronics Power Supply SIQ1250R User Manual
Dixon Lawn Mower ZTR GRIZZLY User Manual
Dynasty Spas Hot Tub MC MP DY2 User Manual
Electro Voice Portable Speaker LR4A User Manual
Fisher Paykel Ventilation Hood HT9DGHB2 User Manual
Gaggenau Cooktop KG 260 CA User Manual