GE Ventilation Hood ZV36TSFSS User Manual

ZV36TSFSS – GE Monogram 36" Stainless Steel Professional Hood  
Dimensions and Specifications (in inches)  
28"  
12"  
18"  
25"  
35-15/16"  
Installation Clearances  
These vent hoods are designed to be installed onto a wall or beneath a  
Note: Clearances may vary due to type of cooking product and local  
codes. Check with local inspectors to be sure standard is applicable.  
soffit or cabinet.  
• Install these hoods* 30" min. to 36" max. above the cooking surface.  
*These hoods may be installed 24" min. above a gas or electric drop-in  
style cooktop. Always observe the 30" to 36" clearance when installed  
over any professional style cooktop or range.  
Soffit Installation  
Wall Mount Installation  
SOFFIT  
30" MIN.  
36" MAX.  
30" MIN.  
36" MAX.  
In this installation the ductwork running from the top of the hood will  
be concealed in the soffit or upper cabinetry.  
For this installation, a decorative duct cover is available to conceal the  
ductwork running from the top of the hood. Use of the duct cover requires  
special consideration to the installation height above the countertop.  
®
For answers to your Monogram, GE Profile or  
GE appliance questions, visit our website at  
GEAppliances.com or call  
Listed by  
Underwriters  
Laboratories  
R
®
GE Answer Center service, 800.626.2000.  
Specification Revised 3/03  
 
ZV36TSFSS – GE Monogram 36" Stainless Steel Professional Hood  
Using Duct Cover Accessories  
To avoid unsightly gaps, plan the hood installation height for duct covers  
use. Use the following formula to calculate the need for one of more  
duct covers and to ensure a trouble free installation.  
We recommend that the vent hood and decorative duct cover (if used)  
be on site before final framing and wall finishing. This will help to  
accurately locate studs, ductwork and electrical service.  
• Read these examples carefully to determine the need for one or more  
6" or 12" duct covers.  
Ceiling Height  
B
A = Countertop to ceiling height.  
B = Gap at the top of the hood to the ceiling.  
C = Hood installation height – Plus 18" hood height.  
18" Hood  
Height  
A
NOTE: Dia. C should be between 48" and 54" (for a 30" to 36" installation  
height). Raise or lower the hood installation height to allow use of one  
or more 6" and 12" duct covers.  
C
A - B = C  
INSTALLATION EXAMPLES  
10 ft. Ceiling  
30"  
9 ft. Ceiling  
8 ft. Ceiling  
12"  
24"  
30"  
36"  
30"  
8 ft. ceilings: When the hood is installed 30"  
above the cooking surface and there is no  
soffit or upper cabinetry, order one 12" duct  
cover accessory.  
9 ft. ceilings: When the hood is installed 30"  
above the cooking surface, order two 12" duct  
cover accessories.  
10 ft. ceilings: When the hood is installed 36"  
above the cooking surface, order three 12" and  
one 6" duct cover accessories.  
®
For answers to your Monogram, GE Profile or  
GE appliance questions, visit our website at  
GEAppliances.com or call  
Listed by  
Underwriters  
Laboratories  
R
®
Specification Revised 3/03  
GE Answer Center service, 800.626.2000.  
 
ZV36TSFSS – GE Monogram 36" Stainless Steel Professional Hood  
Features and Benefits  
• 640 CFM Vertical Exhaust  
• Variable Speed Fan Control  
• 2 Halogen Lamps with 4 Lighting Levels  
• Infrared Warming Lamp  
• Utensil Rod  
• Removable Grease Trays  
• Removable Baffle Stainless Steel Filters  
• Model ZV36TSFSS – Stainless steel  
Specification Revised 3/03  
 

Earthquake Sound Speaker 600WRMS User Manual
EdgeStar Beverage Dispenser KC2000SSTWIN User Manual
Electro Voice Portable Speaker DMC 2181A User Manual
Electro Voice Portable Speaker MTH 25 22BT User Manual
Ericsson Two Way Radio MTL SX User Manual
ETA Systems Power Supply ETA S15 User Manual
Fluke Thermometer 1529 User Manual
Gaggia Espresso Maker 740903008 User Manual
Gefen TV Cables EXT HDMI CAT5 844 User Manual
GE Log Splitter GBS22HBS User Manual